By Toda Namiki, Editor, Japanese Auto World
The first service after you buy a used truck tells you more than the sales listing does. Change the oil and check the filters, then inspect the cooling, brakes, tyres and driveline before the truck goes on a full working route. Keep a written record from the first day, because a truck with no history is harder to insure, to sell and to trust.
Key facts
- Service the engine oil and filters first, unless the records prove they were changed recently.
- Check the cooling system, brakes and tyres before any heavy load.
- Keep every invoice and service sheet in one file, with the mileage or engine hours and the date.
What should you service first on a used truck?
Start with the engine oil, the oil filter, the fuel filter and the air filter, because they are the cheapest parts to renew and the ones most often neglected. Then check the coolant level and condition, the radiator and hoses, and the drive belts for cracks and glazing. A cooling fault that starts on a loaded hill can damage an engine within a short distance.
How do you check the brakes and tyres on a used truck?
Have a mechanic inspect the brake pads or linings, the discs or drums, the brake lines and the brake fluid. Check the tyres for tread depth, uneven wear, cuts, bulges and the sidewall date code. Check the wheel nuts for tightness and look for rust around the wheel hubs. Brakes and tyres are the first safety items to fail under load, so treat any doubt as a reason to fix before use.
What should you check in the driveline?
Check the clutch, gearbox oil, propeller shaft and differential for leaks, noise and play. On a 4WD, check the transfer case and the front axle, and confirm the four-wheel-drive system works in both modes. Replace worn universal joints before they fail on the road, because a broken shaft can leave the truck stranded or damaged.
How do you check the frame and body?
Look underneath for rust on the chassis rails, cross members and spring hangers. Check the body mounts and the welds where the body meets the chassis. Repair small rust spots early, while the metal is still sound, and keep the underbody clean in wet or salty conditions.
How do you keep a service record that helps you sell later?
Record the date, the mileage or engine hours, the work done, the parts fitted and the workshop name. Photograph the parts replaced and keep the old-part receipts where possible. A complete record helps you price the truck fairly when you sell it, and it helps the next mechanic see what has already been done.
What does a maintenance plan look like for a working truck?
Set a service interval for each system and write it into the record. Use the manufacturer's maintenance schedule as the starting point, and adjust it for dusty roads, heavy loads, short trips and cold starts. A truck that works in hard conditions needs shorter intervals than one used on smooth highways.
Frequently asked questions
What should I service first on a used truck?
Start with the engine oil and filters, then check the cooling system, brakes and tyres. These are the cheapest checks and the most useful ones.
How often should a work truck be serviced?
Follow the manufacturer's schedule and shorten it for heavy loads, dusty roads and short trips. The truck's own service records show what the previous owner did.
Is a used truck with no service history a bad buy?
It is a riskier buy. Price it for the work you will have to do, and have a mechanic inspect the frame, brakes and drivetrain before you commit.
Verdict
A used truck is only as dependable as its maintenance record. Do the first service, write it down, and fix the brakes and cooling before the first heavy run. For the buying side, read the used truck buying checklist, and for the business side, the guide to running a trucking company with used Japanese trucks.